An Itanium machine running the port of the OpenVMS operating system has been successfully booted into a cluster. Go, the Engineering Team!
$ show cluster
View of Cluster from system ID 20458 node: CONMAN 15-MAY-2003 20:27:13
****************************************************************
* SYSTEMS * MEMBERS *
****************************************************************
* NODE * HW_TYPE * SOFTWARE * STATUS *
****************************************************************
* CONMAN * Generic Itanium Platform * VMS X9SG * MEMBER *
* KNOTS * AlphaServer 1000A 5/300 * VMS V7.3 * MEMBER *
****************************************************************
$
$ show sys
OpenVMS X9SG-M2O on node CONMAN 15-MAY-2003 20:28:07.25 Uptime 0
00:08:12
Pid Process Name State Pri I/O CPU Page flts
Pages
20C00401 SWAPPER HIB 16 0 0 00:00:04.18 0
0
20C00406 CLUSTER_SWVERS CUR 1 12 6 0 00:07:17.88 84
116
20C00407 CLUSTER_SERVER HIB 14 24 0 00:00:00.04 140
217
20C00408 CONFIGURE HIB 9 42 0 00:00:00.01 106
94
20C00409 LANACP HIB 12 87 0 00:00:00.07 269
382
20C0040A FASTPATH_SERVER HIB 10 30 0 00:00:00.02 259
224
20C0040B CACHE_SERVER HIB 16 6 0 00:00:00.00 81
114
20C0040C OPCOM HIB 6 82 0 00:00:00.04 210
156
20C0040D AUDIT_SERVER HIB 8 85 0 00:00:00.07 264
374
20C0040E JOB_CONTROL HIB 8 36 0 00:00:00.00 143
241
20C00410 SMISERVER HIB 7 79 0 00:00:00.04 346
524
20C00411 NETACP HIB 10 35 0 00:00:00.01 174
263
20C00412 EVL HIB 4 100 0 00:00:00.07 287
352 N
20C00413 REMACP HIB 8 9 0 00:00:00.00 89
91
20C00415 SYSTEM CUR 0 4 869 0 00:00:00.60 2655
374
$
$ sho dev d
Device Device Error Volume Free
Trans Mnt
Name Status Count Label Blocks
Count Cnt
CONMAN$DKA100: Online 0
CONMAN$DKB0: Mounted 0 IA64X9SG 56469798
93 1
CONMAN$DKB200: Online 0
CONMAN$DKB400: Online 0
CONMAN$DQA0: Online 0
CONMAN$DQA1: Online 0
$11$DKA0: (KNOTS) Online 0 (remote shadow member)
$11$DKA100: (KNOTS) Online 0
$11$DKA200: (KNOTS) Online 0 (remote shadow member)
$11$DKA300: (KNOTS) Online 0 (remote shadow member)
$11$DKA400: (KNOTS) Online 0
$11$DKA500: (KNOTS) Mounted 0 (remote mount)
1
$11$DKA600: (KNOTS) Mounted 0 (remote mount)
1
$
This test shows that the mainline code paths for the following cluster functionality is working:
ok....who came up with the node name ?
Posted by: Christopher Foster at May 20, 2003 8:19 AM
Comments are closed